CBH-100AL Oil Can Eliminator- Dent Shrinking Machine *BONUS* PLUS Aluminum Magnet!
These will also include a high powered, rubber coated T-Handle Magnet for grounding the aluminum panels. To use it, first, you remove the back side coating, then apply the magnet to the outside of the panel (the painted side) and the grounding electrode to the back side The magnets are powerful enough to hold THROUGH the aluminum, creating a great ground. The new piece has a nice rubber coating over the magnet to prevent damage to the pretty side of the panel.
This unit finally brings Electro Shrinking tech in reach of EVERY PDR technician. This machine is used on extremely deep "stretched" dents , that are coming out, but start to "oil can" which means they lose their integrity before the repair is complete, and the dent flops from high to low with a slight push from either side.
This happens because the original impact stretched the metal, effectively creating too much metal to occupy the given space, which results in either too high or too low of an area.
This is where most techs give up!
BUT with the CBH-100 you can STILL GET IT FLAT!! You have to get access to the back of the dent, remove the E-Coat, affix the ground to the panel somewhere else, then start working the dent with the electrode. NOT using tool pressure, but using the power of the CBH, you can literally see the tool underneath the skin, just like a dent tool! Every little "push" shrinks it a little more and you continue working until the integrity starts to return to the panel.
It's EXTREMELY useful on beat hail, because you can SAVE panels that are due to be replaced.